Comments on: Cebas Thinking Particles V3.0 SP2 for 3DS MAX2010 (32/64bit)

By: govind

govind — Tue, 07 Sep 2010 11:58:09 +0000

hey!after installation of ip-clamp,i ran keygen and pressed crack button…..bt i wasnt patched i shows me the alert (cant open file please close license manager)

please give me the solution…..for installing thinking particle

By: Omer

Omer — Fri, 27 Aug 2010 13:57:08 +0000

Thx alot man !
i was wondering what i did wrong XD

By: GoodCall

GoodCall — Fri, 20 Aug 2010 12:55:27 +0000

Hey, Here the solution! When popups window with license server error – dont take a gun, wait – just run IPCLAMP again, reselect Localhost (for portm ip info) – APPLY, then find lower there – your PORT ****, IP ***.***.***.*** and enter this data in popup window in 3dsmax – TADAaaaa//// So simply, it need just to try to solve this problem the simpliest way ever,,,yes?? Good particles to all!!!!!!!!

The guy who put this post here did a great job!!!!!! It really worksssss! Thankssss my dear!!

By: Hayley

Hayley — Thu, 05 Aug 2010 13:14:58 +0000

Hi everyone!
Gosh – Tricky thing this to get up and running! Im just installing FT.

I have got as far as importing the licence but get the pop-up ‘Licence copied, dynamic reload failed’

What am I doing wrong!!?? its sooo close!!!!

Thanks guys!

By: onyx

onyx — Sun, 25 Jul 2010 21:36:40 +0000

well, i also had similar problem like you. my pc is running on vista win 32. i have tried all the above suggestions and they all work successfully until the issue of importing license error ‘ licence copied, dynamic reload’.
this problem was resolved by using and older version of ip-camp.
i followed the following steps:

1. i downloaded cebas thinking particles r 4.0 for 3ds max 2010 win32
2. i also downloaded the V3.0.SP2.For.3dsmax.32bit posted by immortal900 which i think was meant for 3ds max 2009
3. i then replaced IP-clamp1.2 of R4. with V3.0
4. go to program files or anywhere you installed the thing.
5. just copy folder ‘IP-Clamp’ to your desktop or any ware else.
6. fire the crack and press ‘crack’.
7. select the duplicated ‘IP-Clamp’ folder as the path and it will show that crack is successful.
9. Now, select the cracked ‘IP-Clamp’ folder and replace it with the original one in your program files directory.(it will prompt about need admin rights and all. just continue all these ones.)
10.now you can reboot and make sure ipclamp service is running. Launch IP-Clamp.exe and choose ‘localhost’ as primary network adapter, apply.
11. Create a request file using your personnal informations and a licence code generated by our keygen.
12. Use keygen to generate a valid licence ipclamp.lic from this request. 13.Save the lic where except in IPClamp’s dir (otherwise you won’t be able to import the it).
14. Import your licence in IP-Clamp and it will notify you “sucess…”
7. Install every Cebas plug-ins you need.
8. Enjoy it!

By: islam oliva

islam oliva — Mon, 05 Jul 2010 04:12:21 +0000

i get must stop IP-clamp from task manger go to services and stop runing it and runing crack have working men

By: HON

HON — Sat, 26 Jun 2010 16:48:09 +0000

THANK YOU SO MUCH, I DIDNT REALIZE SUCH A TRICK!!! YOU”RE THE SMARTEST HELL SON OF A SUNRISE. THINKING PARTICLE HERE I COME!!

By: lazz

lazz — Wed, 09 Jun 2010 20:41:15 +0000

I installed all ok but I do not give any password and when I enter into max, i need a password anyone know why it happens??

By: Ronnie

Ronnie — Thu, 20 May 2010 02:01:37 +0000

that is because this is for max 2010, not 9.

download the version for 3ds max 9 here:
http://rapidshare.com/files/176073000/Cebas.Thinking.Particles.V3.0.SP2.For.3dsmax.32bit-XFORCE.rar

By: slyngel

slyngel — Tue, 18 May 2010 10:01:17 +0000

does it work for max 2011 or does somebody have the thinking particles 2011 installer?

By: ed

ed — Sat, 01 May 2010 14:36:05 +0000

sorry to say but for me it does not work on 3ds max 2011.
all license is properly configured but when opening the TP
control panel inside of max, max is freezing responding only
to shutting down the process through the task manager.

By: twoheart

twoheart — Tue, 27 Apr 2010 13:39:14 +0000

As far as I know TP3 SP2 will work for max 2011 as well as for 2010.
The problem may be, that there are some changes made by Autodesk regarding the paths of plugin information.
If you encounter problems during initialization of the plugins while max is starting, try chnaging the paths in the plugin.ini files (search for them on your c:\ drive).
Cebas only changed the installers for max 2011 to maintain compatible paths.

By: eee

eee — Mon, 26 Apr 2010 04:19:27 +0000

DO YOU HAVE FOR MAX 2011????? THANKS

By: ryan_g

ryan_g — Tue, 23 Mar 2010 21:00:20 +0000

hi there, i’ve found a solution similar to K. it’s like this:
-> start max and add a “final toon” effect to your file.
-> it then says License Error..bla bla.
-> go to your firewall and turn it off for a moment.
-> return to max and load final toon (it loads without showing the License Error pop-up).
-> turn your firewall back on.

good luck !

P.S.: 1. this works untill you quit max.
2. when you reopen max, you have to do this same trick again.
3. i have done this only with final toon. i do not know if this method works for other plugins from c***s.

By: K

Fri, 19 Mar 2010 21:30:15 +0000

By: sophea

sophea — Fri, 19 Mar 2010 04:59:57 +0000

i have problem with IP_Clamp i had insall it follow the not but when i import IP Lisent it alway invalid Licent so how i can i do

By: Calibre

Calibre — Thu, 18 Mar 2010 05:50:58 +0000

Thanks so much for this guys, you rock. At first I was having trouble installing the license but i ran IP Clamp as Administrator and no worries, thanks again

By: ravi

ravi — Tue, 09 Mar 2010 10:42:58 +0000

I figured it out guys.. if Cannot Open Files! Please close licence manager!! msg appears (happens in win7 and vista) just,

> go to program files or anywhere you installed the thing.
> just copy folder ‘IP-Clamp’ to your desktop or any ware else.
> fire the crack and press ‘crack’.
> select the duplicated ‘IP-Clamp’ folder as the path
> it will show that crack is successful.
> Now, select the cracked ‘IP-Clamp’ folder and replace it with the original one in your program files directory.(it will prompt about need admin rights and all. just continue all these ones.)
> There.. that prob is fin. and now you can continue with the next steps.

but after that, if the software askes for a port number, ip address, and password, just open ipclamp application and paste the values shown there. it will work great. “)

By: ravi

ravi — Tue, 09 Mar 2010 06:26:06 +0000

The ipclamp service is not running. but still getting Cannot Open Files! Please close licence manager!!@??@?@? please help..

By: kraizeg

kraizeg — Thu, 25 Feb 2010 22:49:35 +0000

lol
Error of closing licence manager->
- ctrl+alt+del, task manager, see all user process and CLOSE ipclamp service…
- now, run xforce as administrator (right click)
- now run ip-clamp as administrator
in request, fill in all the gaps (as u want)
in licence code put generated with xforce and press add button
choose your lan controller in adapter (down there)
- press request button
a file *.lic is generated where you want
- go to xforce and insert file path (where you had save it before)
- specify the source for the new *.lic file you will use
- go to ipclamp and push add licence
:O sorry for my english and visit me!

By: eric

eric — Sun, 29 Nov 2009 20:21:03 +0000

i have the exact same problem. haven’t figured out yet. I have a thread here in the forum section http://forum.cgpersia.com/f32/cebas-plugins-problem-3843/ check it out, it has no solution yet but something may come up.

By: pim

pim — Mon, 23 Nov 2009 13:43:26 +0000

I have discovered the same problem. I had installed FR before without any problems so it seems strange that all of a sudden this problem should emerge.

If anyone has an idea would be great!

/Pim

By: Bobster

Bobster — Thu, 12 Nov 2009 13:03:56 +0000

when open x force then press crack for the ip-clamp file, then it says please close licence manager, then i went to service manager and stopped it then try again, but it keeps saying close licence manager and it’s not even open and it’s not located in my task manager even….. NEED HELP!!!

By: Skaterbassboy

Skaterbassboy — Wed, 04 Nov 2009 16:03:33 +0000

get the error can’t open the file as an archive. anyone know how to fix that? thanks again

By: Christhopher

Christhopher — Sat, 03 Oct 2009 15:39:10 +0000

Create a request file using your personnal informations and a licence code generated by our keygen. How , and witch one???

By: jfk316

jfk316 — Wed, 09 Sep 2009 22:03:30 +0000

keygen wont start says windows cannot find path or you do not have sufficient rights.i ran it as admin and changed compatibility modes but wont work.Using vista.any1 got it to work on vista?

By: El_Bichu

El_Bichu — Tue, 25 Aug 2009 04:14:31 +0000

1. Instal IP-clamp
1.1, *DO NOT REBOOT* and *DO NOT EXECUTE IT*!
2. Fire our keygen, press Crack and pick Cebas/Ip-clamp dir. (only the public crypto key will be patched)
3. Now you can reboot and make sure ipclamp service is running.
4. Launch IP-Clamp.exe and choose ‘localhost’ as primary network adapter, apply.
4. Create a request file using your personnal informations and a licence code generated by our keygen.
5. Use keygen to generate a valid licence ipclamp.lic from this request. Save the lic where except in IPClamp’s dir (otherwise you won’t be able to import the it).
6. Import your licence in IP-Clamp.
7. Install every Cebas plug-ins you need.
8. Enjoy it!

NB: if you already have IP-clamp 1.1 installed skip to 7

By: rajeev

rajeev — Thu, 20 Aug 2009 00:48:32 +0000

when i trying to use it….it shows license server error…help me guys…

By: Xperia001

Xperia001 — Fri, 07 Aug 2009 11:42:09 +0000

If you’re installing it without unzipping it,, don’t close the winzip windows!!
Another way to install is to unzip/extract the files first.

By: Xperia001

Xperia001 — Fri, 07 Aug 2009 11:29:09 +0000

The links that immortal hes given works perfectly,, but it has virus on it!! So you have to disable your antivirus during the cracking progress.. It worked for me.

PM: Run everything as Administrator just to make sure.

By: Xperia001

Xperia001 — Fri, 07 Aug 2009 10:54:56 +0000

Can anyone help me with the crack..?!! Im always stuck.. I have followed the steps correctly.
Am using 3ds Max(x86) on a 64bit Vista.
I also used the user authorisation thing. When I imported the License,, it says, license copied, dynamic reload failed.
And when I start thinking particle in 3ds Max, it would say license not,, or sometimes when it works,, it tells me to setup the IP pass and host,, but always get a retry..
Any help??

By: prashant

prashant — Sat, 01 Aug 2009 05:28:15 +0000

this a relay software working
my computer in this software not work
i have 32bia Gra.
and 3d max9

By: ankit

ankit — Sun, 05 Jul 2009 14:31:41 +0000

when i open IP-Clamp a window blinks and thn closes…….
can anyone tell me how to open the work area for IP-Clamp…….and from where……….

By: Wolfy

Wolfy — Mon, 22 Jun 2009 08:47:32 +0000

Thank you so much. I will try it and see what happens.

By: faracry

faracry — Mon, 22 Jun 2009 08:03:44 +0000

Download from Depositfiles: http://depositfiles.com/files/u5uiqb5ku.rar

By: dqkttzqyrh

dqkttzqyrh — Sun, 21 Jun 2009 09:42:05 +0000

jAiN44 pjoijnlzjnsd, [url=http://ibztuqlbquaz.com/]ibztuqlbquaz[/url], [link=http://lkztmsnzrtcj.com/]lkztmsnzrtcj[/link], http://rwprwvpojiuy.com/

By: immortal900

immortal900 — Sun, 21 Jun 2009 09:09:18 +0000

ok this time maybe I can help, I have installes it on windows 7 x64, so I give you my step:
-I installed ipclamp
-I ran the keygen as administrator and press the crack button
-then search for the IPClamp folder
-then reboot
-AND here here the IMPORTANT part I think is to run IPclamp as administrator too because if you don’t it import you license but there is a windows that open and then reload failed
-then I choosed localhost
After I think you know
Hope it resolved your problem

By: mrfixit36

mrfixit36 — Sat, 20 Jun 2009 23:51:42 +0000

tried to run keygen this crap keygen don’t work ran as administrator

By: Jutt

Jutt — Sat, 20 Jun 2009 17:37:09 +0000

any one have a web of 3d max in this tut of effect and modeling. only video
tutorial on this web. tell me Soooooooooooooon

By: immortal900

immortal900 — Sat, 20 Jun 2009 16:49:01 +0000

you need to run it as administrator I think