Bunkspeed SHOT? is the reimagined, all new generation replacement for HyperShot. Bunkspeed was the first to create an intuitive “virtual digital camera” in the form of interactive real-time rendering with UDRIVE in 2003, then again in 2007 with the first real time ray tracing application HyperShot. Simple and elegant workflow enabled digital designers to bring their creations to realistic life, in minutes not hours. Bunkspeed’s innovative and passionate team have done it again with the pending introduction of the next generation – Bunkspeed SHOT?.
Hybrid rendering – Bunkspeed SHOT? can use either the CPU, GPU or both.
Can scale seamlessly to one or more workstations or to a large cluster
Works with most all CAD data
Doesn’t require a high end graphic card
Works well on a dual core laptop
Significantly accelerated with the powerful parallel processing power of NVIDIA CUDA-enabled GPU’s
37 comments on “Bunkspeed SHOT 2011 BETA 4(32/64Bit)”
Thx NoBaX….getting the baby right know – gonna see how this compares to my OCTANE
greetz
Thank you NoBax!
My AV says Malware:gen for the x64 patch.
lol my AV(ESET)didn’t say anything……
you’re right. AVs use to complain a lot, when the day is long :o)
So far I like Keyshot a lot better than this.
Thanks :D
thanks a lot :)
it keeps crashing everytime I open a scene or create a new one!
help please
Isn’t Keyshot supposed to replace Hypershot, as Luxology used to sell Hypershot. Or a scenario similar.
So, is this one any good as Keyshot is?
SHOT replaces HyperShot, which was sold by Bunkspeed. After HyperShot ceased, one of the developers left and released KeyShot which was pretty much the same as HyperShot, and it was under the name Luxion, not to be confused with Luxology, the makers of modo.
uhmmm.. not really.
Keyshot IS the real successor of Hypershot. Luxion owned the technology behind the old Hypershot and they basically got it back and release Keyshot.
Bunkspeed adapted their HyperMove technology to make SHOT. They restarted everything from the beginning with all-new software / interface / rendering engine.
Thanks, I’ll try it later @ home!
WORKS but too slow compared to OCTANE
Thanks for the up!
Also interested to test Octane more than the demo allows – anyone knows where to get it?
Thanks
thanks Nobax can you upload Bunkspeed hyperMove
32 bit patch fails to open? Anyone else gets this?
Running Win7 x64 but not getting the Apply or About buttons showing on screen, but running the win32 patch has both buttons showing.
Anybody else getting this or found a solution ???
JoeJ says:
June 24, 2010 at 9:31 AM
Running Win7 x64 but not getting the Apply or About buttons showing on screen, but running the win32 patch has both buttons showing.
Anybody else getting this or found a solution ???
I did not solve this particular problem, all credit, FOR ME, goes to RYU.
He said that problem is because of a size in font. So I went into control panel, fonts, (left hand side) change font size. I then changed the font size to the default value of 100%. I am using Win7 64bit. Just a small word of caution, make sure you save any important apps,folders, documents because you have to log off in order for the font size to change. I hope this helps some folks.
DurttyDawg37
it keeps crashing everytime I open a scene or create a new one!
help please
Oh my good, thanks a lot nobax you rules men.
The same to me…., crack doesn’t work!!!! The application crashes all the time when I try to create a new scene…. :-(
@nobax
What the hell did you post here…? What about an ‘how to do’ instruction that works in a proper manner…?
thanks my friend…
this is my favorite real time rendering software…
It asks me to install directX 9c updates, but I can’t find it anywhere, and all the links to it are dead, even on the microsoft page, any ideas people? :/
Im using SHOT for the 1st time.
For some reason, the image is tiny and in the center of the screen! Is there ANY way to resize it ? This is a LOT less intuitive than Hypershot!
For guys who unable to download the Installer from Bunkspeed …
here it is the backages include the crack ……
32 bit
http://hotfile.com/dl/50118724/be23944/Bunkspeed_SHOT_2011_BETA_4_W32_with_crack.part1.ra r.html
http://hotfile.com/dl/50128523/c8a021e/Bunkspeed_SHOT_2011_BETA_4_W32_with_crack.part2.ra r.html
64 bit
http://hotfile.com/dl/50140698/e0adffe/Bunkspeed_SHOT_2011_BETA_4_W64_with_crack.part1.ra r.html
http://hotfile.com/dl/50132396/ad32882/Bunkspeed_SHOT_2011_BETA_4_W64_with_crack.part2.ra r.html
thank you man…
Hello I’m not getting release the program, I downloaded this link with the crack but may not be doing the correct procedure. some explanation?
I installed this FINAL release however both of them when clicking renderig the licensse installer comes out and the program stops responding, anybody tried this release….is it really final? it says B on the logo but on help menu it is OK!……thanks
hey i cant, says error #10, but gives me the option of putting a seria number…
Warning: Be sure to scan all the downloaded files with your Antivirus and if there is an executable or installer file, make sure to have your antivirus active and open in the background while installing or running the app. Some of the materials posted here are downloaded from CGPeers, So they could potentially have something injected in them.
We always ask bloggers to scan all the files before publishing the posts, but sometimes it's hard to detect all these things, so if you found anything suspicious (Not false positive, Generic, Patcher, Riskware and Heuristic results, most patches could get false flags like that by some Antivirus companies.) be sure to post comments with the file name and a VirusTotal report result link or the file MD5 Hash (higher than 30% overall positive result). Thank you.
Thx NoBaX….getting the baby right know – gonna see how this compares to my OCTANE
greetz
Thank you NoBax!
My AV says Malware:gen for the x64 patch.
lol my AV(ESET)didn’t say anything……
you’re right. AVs use to complain a lot, when the day is long :o)
So far I like Keyshot a lot better than this.
Thanks :D
thanks a lot :)
it keeps crashing everytime I open a scene or create a new one!
help please
Isn’t Keyshot supposed to replace Hypershot, as Luxology used to sell Hypershot. Or a scenario similar.
So, is this one any good as Keyshot is?
SHOT replaces HyperShot, which was sold by Bunkspeed. After HyperShot ceased, one of the developers left and released KeyShot which was pretty much the same as HyperShot, and it was under the name Luxion, not to be confused with Luxology, the makers of modo.
uhmmm.. not really.
Keyshot IS the real successor of Hypershot. Luxion owned the technology behind the old Hypershot and they basically got it back and release Keyshot.
Bunkspeed adapted their HyperMove technology to make SHOT. They restarted everything from the beginning with all-new software / interface / rendering engine.
Thanks, I’ll try it later @ home!
WORKS but too slow compared to OCTANE
Thanks for the up!
Also interested to test Octane more than the demo allows – anyone knows where to get it?
Thanks
thanks Nobax can you upload Bunkspeed hyperMove
32 bit patch fails to open? Anyone else gets this?
Running Win7 x64 but not getting the Apply or About buttons showing on screen, but running the win32 patch has both buttons showing.
Anybody else getting this or found a solution ???
JoeJ says:
June 24, 2010 at 9:31 AM
Running Win7 x64 but not getting the Apply or About buttons showing on screen, but running the win32 patch has both buttons showing.
Anybody else getting this or found a solution ???
I did not solve this particular problem, all credit, FOR ME, goes to RYU.
He said that problem is because of a size in font. So I went into control panel, fonts, (left hand side) change font size. I then changed the font size to the default value of 100%. I am using Win7 64bit. Just a small word of caution, make sure you save any important apps,folders, documents because you have to log off in order for the font size to change. I hope this helps some folks.
DurttyDawg37
it keeps crashing everytime I open a scene or create a new one!
help please
Oh my good, thanks a lot nobax you rules men.
The same to me…., crack doesn’t work!!!! The application crashes all the time when I try to create a new scene…. :-(
@nobax
What the hell did you post here…? What about an ‘how to do’ instruction that works in a proper manner…?
Don’t waste your time guys….!
http://forum.cgpersia.com/f13/bunkspeed-shot-2011-beta-4-w32-64-amon-ra-16145/
Now STFU……
hi noobox thx a lot for your work!
can you help me pls i need as fast as possible bunkspeed move!
thanks a lot
NoBaX lox
hi guys thanks a lot to you people that make all this possible!
i love you.
i need so fast as possible bunkspeed move! who can help me please!
BLABLA =>
Stopped working
????????? ????????:
??? ??????? ????????: APPCRASH
Application Name: Bunkspeed Shot.exe
Application Version: 1.0.0.0
Application Timestamp: 4c1c01c6
Fault Module Name: unknown
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000217cf610
?????? ??: 6.0.6001.2.1.0.256.1
??? ?????: 1049
thanks my friend…
this is my favorite real time rendering software…
It asks me to install directX 9c updates, but I can’t find it anywhere, and all the links to it are dead, even on the microsoft page, any ideas people? :/
Im using SHOT for the 1st time.
For some reason, the image is tiny and in the center of the screen! Is there ANY way to resize it ? This is a LOT less intuitive than Hypershot!
For guys who unable to download the Installer from Bunkspeed …
here it is the backages include the crack ……
32 bit
http://hotfile.com/dl/50118724/be23944/Bunkspeed_SHOT_2011_BETA_4_W32_with_crack.part1.ra r.html
http://hotfile.com/dl/50128523/c8a021e/Bunkspeed_SHOT_2011_BETA_4_W32_with_crack.part2.ra r.html
64 bit
http://hotfile.com/dl/50140698/e0adffe/Bunkspeed_SHOT_2011_BETA_4_W64_with_crack.part1.ra r.html
http://hotfile.com/dl/50132396/ad32882/Bunkspeed_SHOT_2011_BETA_4_W64_with_crack.part2.ra r.html
thank you man…
Hello I’m not getting release the program, I downloaded this link with the crack but may not be doing the correct procedure. some explanation?
Bunkspeed HyperDrive 2010 SP2 x32Bit
rapidshare.com
http://rapidshare.com/files/402536665/Hyperdrive_10_SP2_32bit.part1.rar
http://rapidshare.com/files/402536532/Hyperdrive_10_SP2_32bit.part2.rar
http://rapidshare.com/files/402536620/Hyperdrive_10_SP2_32bit.part3.rar
http://rapidshare.com/files/402339504/Hyperdrive_10_SP2_32bit.part4.rar
hotfile.com
http://hotfile.com/dl/50451367/d6adadb/Hyperdrive_10_SP2_32bit.part1.rar.html
http://hotfile.com/dl/50451548/a81929f/Hyperdrive_10_SP2_32bit.part2.rar.html
http://hotfile.com/dl/50451462/adbf606/Hyperdrive_10_SP2_32bit.part3.rar.html
http://hotfile.com/dl/50451628/bccfc90/Hyperdrive_10_SP2_32bit.part4.rar.html
Bunkspeed HyperDrive 2010 SP2 x64Bit
rapidshare.com
http://rapidshare.com/files/402705629/Hyperdrive_10_SP2_64bit.part1.rar
http://rapidshare.com/files/402706783/Hyperdrive_10_SP2_64bit.part2.rar
http://rapidshare.com/files/402705801/Hyperdrive_10_SP2_64bit.part3.rar
http://rapidshare.com/files/402702637/Hyperdrive_10_SP2_64bit.part4.rar
hotfile.com
http://hotfile.com/dl/50556520/36fdecb/Hyperdrive_10_SP2_64bit.part1.rar.html
http://hotfile.com/dl/50555980/d68b7c1/Hyperdrive_10_SP2_64bit.part2.rar.html
http://hotfile.com/dl/50556312/5f86154/Hyperdrive_10_SP2_64bit.part3.rar.html
http://hotfile.com/dl/50557130/11e02c9/Hyperdrive_10_SP2_64bit.part4.rar.html
[COLOR=”DarkOrange”][SIZE=”5″][B]Here it is the final release with crack :[/B][/SIZE][/COLOR]
[SIZE=”5″]Bunkspeed [COLOR=”Red”]Shot[/COLOR] 2011 32bit Final with Crack[/SIZE]
[QUOTE]
http://hotfile.com/dl/57611022/98dbfb3/Bunkspeed_Shot_2011_32bit_Final_with_Crack.part1.rar.html
http://hotfile.com/dl/57617382/cccf8db/Bunkspeed_Shot_2011_32bit_Final_with_Crack.part2.rar.html
http://hotfile.com/dl/57624072/ff98d57/Bunkspeed_Shot_2011_32bit_Final_with_Crack.part3.rar.html
http://hotfile.com/dl/57630938/28bde07/Bunkspeed_Shot_2011_32bit_Final_with_Crack.part4.rar.html
http://hotfile.com/dl/57637729/8b04aa3/Bunkspeed_Shot_2011_32bit_Final_with_Crack.part5.rar.html
[/QUOTE]
[SIZE=”5″]Bunkspeed [COLOR=”Red”]Shot[/COLOR] 2011 64bit Final with Crack[/SIZE]
[QUOTE]
http://hotfile.com/dl/57643328/9e59207/Bunkspeed_Shot_2011_64bit_Final_with_Crack.part1.rar.html
http://hotfile.com/dl/57650631/953d23b/Bunkspeed_Shot_2011_64bit_Final_with_Crack.part2.rar.html
http://hotfile.com/dl/57657669/26e6760/Bunkspeed_Shot_2011_64bit_Final_with_Crack.part3.rar.html
http://hotfile.com/dl/57665007/7b5f5e2/Bunkspeed_Shot_2011_64bit_Final_with_Crack.part4.rar.html
http://hotfile.com/dl/57672598/e821d9b/Bunkspeed_Shot_2011_64bit_Final_with_Crack.part5.rar.html
[/QUOTE]
I installed this FINAL release however both of them when clicking renderig the licensse installer comes out and the program stops responding, anybody tried this release….is it really final? it says B on the logo but on help menu it is OK!……thanks
hey i cant, says error #10, but gives me the option of putting a seria number…
ANYONE HAVE A VERSION FOR MAC?