VirtualRig Studio Pro v2.2
Curved motion blur software
VirtualRig Studio software creates realistic curved motion blur simulation previously only available with expensive camera rigs. VirtualRig drastically reduces the cost of professional car photography, cuts production time and brings new opportunities into CGI photography.
http://www.url-dead/file/1811245414/VIRTUALRIG_STUDIO_PRO_V2.2-XFORCE.rar
http://www.fileserve.com/file/Fa36bVY/VIRTUALRIG_STUDIO_PRO_V2.2-XFORCE.rar
http://www.uploadstation.com/file/pS2Kbce/VIRTUALRIG_STUDIO_PRO_V2.2-XFORCE.rar
http://ifile.it/rsqlcby/VIRTUALRIG_STUDIO_PRO_V2.2-XFORCE.rar
Thanks To X-FORCE
Good Morning and thank you for the release;)
Keep up doing what you do!!!
oh no, now every fool will use it…
Thanks matey.
Thanks
thanks a lot!!!! i was like a year searching it
que bacana. Obrigado. N?o conhecia o programa. Valew!!
Crack Error ?
Message: Error installing the license file
Exception: cz.plgr.virtualrig.a.p: The license string is corrupted.
at cz.plgr.virtualrig.a.h.b(Unknown Source)
at cz.plgr.virtualrig.a.h.a(Unknown Source)
at cz.plgr.virtualrig.ui.LicenseErrorDialog.a(Unknown Source)
at cz.plgr.virtualrig.ui.ak.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.awt.EventQueue$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at cz.plgr.virtualrig.ui.LicenseErrorDialog.a(Unknown Source)
at cz.plgr.virtualrig.a.h.b(Unknown Source)
at cz.plgr.virtualrig.ui.VirtualRigView.(Unknown Source)
at cz.plgr.virtualrig.ui.VirtualRigApp.startup(Unknown Source)
at org.jdesktop.application.Application$1.run(Application.java:171)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.awt.EventQueue$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: cz.plgr.virtualrig.a.p: The computer fingerprint string is not valid (header not found).
at cz.plgr.virtualrig.a.c.a(Unknown Source)
… 64 more
okay not a problem
How did you end up with it working? I tried every way possible but keeps on getting that error that the license string is corrupted.
Followed the simple instructions and even tried it “run as admin” for everything but cant figure out where the problem lies.
Win 7 x64 ultimate and not new to this but this one is stumping me.
yes, i have the same error… Any solution?
thnak you :)
Any chance for Mac Os version?
run the aplication and keygen as administrator
Thanks to XF AND CGP
Thanks works great.
NEED HELP:
Don’t use the copy button on the computer id number
Highlight the number and CTRL-C then CTRL-V to paste into keygen, Keygen needs all info to be filled in.
no luck my friend.
Still I m having errors.
Interesting tool, but XForce please a Mac version … please please!
My works:
– Overwrite crack virtualrig-studio-2.2-pro.jar
– Run VirtualRig
– Run the keygen: generating a license – copy Fingerprints (must be in the text editor to delete all the spaces. Don?t use the copy button on the computer id number – insert the keygen as follows: CTRL-C CTRL-V). Fill all data in this keygen “N / S”
– Close your VirtualRig
– Put back the original file (go back the original file) virtualrig-studio-2.2-pro.jar
– Run and install a license VirtualRig
– And that’s it! (at least for me …)
PS: careful to copy your entire Fingerprints – enlarge the window! It is also possible that Fingerprints is different with the original virtualrig-studio-2.2-pro.jar and with the cracked virtualrig-studio-2.2-pro.jar. And maybe the continuously changing
PPS: Translated by Uncle Google :-)
My works:
– Overwrite crack virtualrig-studio-2.2-pro.jar
– Run VirtualRig
– Run the keygen: generating a license – copy Fingerprints (must be in the text editor to delete all the spaces. Don?t use the copy button on the computer id number – insert the keygen as follows: CTRL-C CTRL-V). Fill all data in this keygen N/S
– Close your VirtualRig
– Put back the original file (go back the original file) virtualrig-studio-2.2-pro.jar
– Run and install a license VirtualRig
– And that’s it! (at least for me …)
PS: careful to copy your entire Fingerprints – enlarge the window! It is also possible that Fingerprints is different with the original virtualrig-studio-2.2-pro.jar and with the cracked virtualrig-studio-2.2-pro.jar. And maybe the continuously changing
PPS: Translated by Uncle Google :-)
I have noticed that the license string corruption only happens on some machines – I have installed it successfully on an Acer laptop and on a Mac Pro 8core running OS 10.6.8 (with some minor adjustments to the crack) But I still get the license string corruption on a 12core Mac, either running VMware or OSX native. I have had a look at the license string and it would appear that the string is too long for the keygen – I am still trying to work it out.
XForce please a Mac version ? please!!!!!!!!!! THX
To make it work on a mac download the mac trial version from VirtualRig site. Instal the trial. Show package contents, contents/Resources/Java, in Java folder Remove file virtualrig-studio-2.2-trial.jar.
From the downloaded X-Force crack rename virtualrig-studio-2.2-pro.jar to virtualrig-studio-2.2-trial.jar and put this file into Java folder.
Open VirtualRig and you will be asked for licence – copy fingerprint to textedit, remove all spaces and save file.
Open VMware run PC Keygen paste in fingerprint code – generate licence – copy back to mac and point virtualRig at the new mac licence.
Thats all there is to it.
Message: An error occured while checking the license
Exception: cz.plgr.virtualrig.a.p: Error occured while checking license authenticity.
at cz.plgr.virtualrig.a.h.a(Unknown Source)
at cz.plgr.virtualrig.a.h.b(Unknown Source)
at cz.plgr.virtualrig.ui.VirtualRigView.(Unknown Source)
at cz.plgr.virtualrig.ui.VirtualRigApp.startup(Unknown Source)
at org.jdesktop.application.Application0.71?run(Application.java:171)
at 0?java.awt.event.Invocati0.71?onEvent.dispatch(Invoca0.71?tionEvent.java:209)
at java.awt.Event0.71?Queue.dispatchEventImpl(EventQueue.java:677)
at java.awt.EventQueue.access(EventQueue.java:85)
at java.awt.EventQueuerun(EventQueue.java:638)
at java.awt.EventQueuerun(EventQueue.java:636)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContextdoIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:647)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: javax.crypto.BadPaddingException: Data must start with zero
at sun.security.rsa.RSAPadding.unpadV15(RSAPadding.java:308)
at sun.security.rsa.RSAPadding.unpad(RSAPadding.java:255)
at com.sun.crypto.provider.RSACipher.a(DashoA13*..)
at com.sun.crypto.provider.RSACipher.engineDoFinal(DashoA13*..)
at javax.crypto.Cipher.doFinal(DashoA13*..)
… 19 more
MISTER-Key – are you using a 12core Mac? I can get it to work on 4cores and 8cores but it fails on 12cores – I think it has something to do with the length of the fingerprint number string – if you open the generated licence in an xml viewer you will see that only a part of the number string is present, the end numbers are missing. This must be a limitation of the X-Force licence keygen – hopfully it will be adressed and a new licence keygen will be issued.
andymac68.
thank you for the answer, I’m on a 4cores, I wait with the new impaciente keygen.
Hello,
I am a mac user and I don’t know how to complete that step “From the downloaded X-Force crack rename virtualrig-studio-2.2-pro.jar to virtualrig-studio-2.2-trial.jar and put this file into Java folder” as the rar file is a windows file…
Thanks for your help!
T.
Tibo – The X-Force crack file is a windows file – expand the rar file and you will find a folder called Crack – inside this folder is a file called Virtualrig-studio-2.2-pro.jar – duplicate this file and rename it virtualrig-studio-2.2-trial.jar. Right click (or control click) on the VirtualRig app and go to Show package contents, contents/Resources/Java, in Java folder Remove file virtualrig-studio-2.2-trial.jar, and replace it with the file you just renamed, which is cracked.
Then start up VM Ware Fusion or a similar windows emulator and run the keygen.exe.
Now startup Virtualrig and you will get a dialog box that asks for your licence key. ? copy fingerprint number to textedit, remove all spaces and save file. From the textedit file copy all the numbers and paste them into the bottom line of the keygen and hit generate. This will generate an xml file. Drag this to the Mac desktop and in virtualrig click on install licence. Now navigate to your desktop and choose the xml file you just generated.
I have tried this on several macs and it has worked on all of them exept 12core machines – I think it is because the number string generated is yoo long. If you keep having problems PM me and I’ll see what I can do.
Hey Andymac…
Thanks you so much. I think it’s working fine now. I’m sure I am going to enjoy this software a lot! Thank again ;)
Hey Tibo – glad you got it working! Forgot to say – use little snitch to block any phoning home – just in-case – have fun
Don’t get the part remove all the spaces in textedit. Who do you do that?
Thanks!
egon – When you copy the fingerprint from the Virtualrig installer dialog, paste that into textedit. If you look at all the numbers you just pasted into text edit, you will see that there are spaces between some of the numbers – you have to remove these and then save the file with no spaces – thats all there is to it.
How can I remove the file file virtualrig-studio-2.2-trial.jar in Java folder on a Mac. It won’t let me drag it to the trash bin
Can anyone help me
Thanks andymac68 for your step-by-step explanation ! :)
@ jdt
just replace the file, you don’t have to remove it at all.
For some reason when I hit \Install License…\ (at the end), it’s not letting me locate the xml file. Going to try to reboot and try again. Anyone have a similar issue?
So I got it working but in a very interesting way. After replacing the .jar file with the one in the crack, I had to rename the end of it from \pro\ to \trial\ then I was allowed to hit the \install license\ button and locate the xml file
Hey, i?ve got a problem. VR 2.2 doens?t works at Windows 8 has anyone an idea?